Skip to content

Knowledge

How vacuum sewerage works

What saves water, where can vacuum drainage help, and what does reliable operation require? Explore the benefits and the system components, with sources and tools to make your own comparisons.

Timber-clad buildings beside rocks reflected in still water.
Foto: A.Taube

How does a vacuum sewer system work?

A vacuum sewer moves wastewater using a difference in air pressure. Vacuum pumps maintain negative pressure in the network. Wastewater collects in chambers and enters the network through interface valves when a set volume has accumulated. A vacuum toilet in a building is a different application, using vacuum at the toilet itself. A municipal vacuum sewer can receive wastewater from conventional toilets, so the network alone does not reduce flushing water.

Why choose vacuum?

Vacuum drainage uses a difference in air pressure to move wastewater. The technology is already in service in European housing developments and sewer networks. Where water use, pipe routes or resource recovery are key concerns, there are practical reasons to include vacuum in a feasibility study.

Less water for flushing

HAMBURG WASSER reports around one litre per flush for vacuum toilets in its water-cycle concept. Air pressure helps move the waste, reducing the water needed. This figure describes that concept; water use and savings in a new project depend on the toilet, its settings and the comparison system.

HAMBURG WASSER · flush water and resource recovery

More options on difficult sites

In buildings, vacuum can provide more ways to route pipes around obstacles during a refurbishment. Outdoors, vacuum sewers can be useful on flat or rocky ground, or where groundwater is high. Shallower, narrower trenches can reduce excavation. Suitability needs to be assessed for each project.

Roediger · vacuum sewer systems

Recover resources from wastewater

Collecting toilet wastewater separately, with less dilution, produces a more concentrated stream. Suitable treatment can then recover nutrients and produce biogas. RecoLab in Helsingborg, Sweden, demonstrates the use of separate wastewater streams. The benefits depend on the whole chain, from toilet to treatment.

City of Helsingborg · RecoLab

The right system for the setting

Start with the needs of the site. Compare water use, electricity demand, noise, servicing and lifetime costs with other options. An outdoor vacuum sewer can receive wastewater from conventional toilets; the network itself does not then reduce flush-water use.

In use in European projects

Water efficiency and resource recovery are priorities for Europe’s water systems. Vacuum is already being used for these purposes, with operating experience from housing developments and sewer networks to draw on.

Water efficiency is a European priority

The European Commission’s Water Resilience Strategy aims to improve water efficiency by 10% by 2030. In our assessment, low-flush vacuum toilets can contribute where they replace flushing systems that use more water.

European Commission · Water Resilience Strategy

EU funding for development and demonstration

Run4Life received around €6.24 million in EU funding for 2017–2021. Low-flush vacuum toilets were developed as part of its work to recover resources from wastewater. The funding covered the whole project, including treatment and resource recovery.

European Commission · Run4Life funding and results

Anglian Water · England

Anglian Water operates vacuum sewers in parts of its region. Its guidance explains property connections and the need to assess capacity and pressure conditions.

Anglian Water · vacuum sewerage systems (PDF)

Jenfelder Au, Hamburg · Germany

Toilet wastewater is collected by vacuum and conveyed to a local biogas plant. Hamburg Wasser describes the technology as part of the district’s separate water cycles.

HAMBURG WASSER · Jenfelder Au

WaterSchoon, Sneek · the Netherlands

Vacuum toilets are used to collect toilet wastewater separately. Operating experience has also prompted research into managing deposits in the vacuum pipes.

STOWA · WaterSchoon and operating experience

De Nieuwe Dokken, Ghent · Belgium

Wastewater from vacuum toilets is collected separately from greywater. It forms part of a system for recovering water, energy and nutrients.

LIFE Local Water Adapt · De Nieuwe Dokken

Sweden also contributes practical experience. Helsingborg participated in the EU-funded Run4Life project alongside Ghent, Sneek and Vigo, providing a basis for knowledge exchange between Swedish and other European projects.

European Commission · Run4Life

These are documented choices for individual projects. Their experience needs to be assessed against the conditions of each new installation.

Vacuum sanitation and emergency preparedness

Sanitation still needs to function when water supplies and sewers are disrupted. Vacuum can be an option for temporary facilities where low flush-water demand and equipment that can be relocated are useful.

Mobile systems for field camps

Jets describes vacuum systems for military camps. According to the supplier, low flush-water use can reduce the volume of water and wastewater that needs to be stored and transported. These are supplier claims, rather than an independent evaluation of wartime operation.

Jets · field-camp systems, supplier information

A Swedish public procurement

Sweden’s MSB specified vacuum toilets and showers connected to a vacuum system in its 2025 procurement of sanitation modules. This documents a particular technology choice for sanitation modules. The procurement does not establish how the systems perform in wartime.

MSB · sanitation modules, 2025 (TED, Swedish notice)

Power and maintenance need planning

The research institute Eawag describes greater maintenance needs than for conventional toilets with gravity drainage. Power supply and contingency planning for outages also need attention. Low water use does not make a system independent of other supplies.

Eawag · Vacuum Sanitation, 2025 (PDF)

Assess water demand, backup power, servicing, spare parts and safe wastewater management for the installation. Plan how sanitation can be maintained if the normal system stops working.

Swedish Environmental Protection Agency · wastewater preparedness (Swedish)

Nutrients · water · resilience

Bring nutrients back to the soil.

The cycle starts at the toilet. A vacuum toilet uses a small flush, so urine and faeces are less diluted. Toilet wastewater is collected separately from bath, kitchen and laundry water. After controlled treatment, the nutrients can be used as fertiliser by a farmer.

From food to the next harvest

  1. Food and people
  2. Vacuum toilet
  3. Separate collection
  4. Treatment and checks
  5. Field and new crops

Water from bathing, washing and laundry still needs separate treatment. The loop is only closed when recovered nutrients are used in cultivation.

What does it mean for households and farms?

Nutrients for another crop

Nitrogen, phosphorus and potassium in toilet waste can be resources for cultivation. Replacing purchased fertiliser requires a tested product and an application rate suited to the crop and soil.

SLU · recovering nutrients from toilets

Less water to collect and transport

A vacuum toilet uses little water. With the same usage, a sealed tank collecting toilet waste fills more slowly, reducing the need for emptying and the volume transported and treated. If your water is metered, you pay less for the volume you save. If you have your own well, you draw less water – particularly valuable when supplies are limited.

Haninge municipality · Swedish collection example

Fertiliser prices and farm costs

Recovered nutrients can replace part of a farm’s purchased fertiliser. Their value depends on plant-available nutrients and the price of the product they replace. Compare that value with collection, treatment, testing, storage and spreading costs. The Bristol trials below are investigating an alternative supply; they do not establish a general cost saving.

Forestry Commission · NPK Recovery project

Count energy throughout the chain

Manufacturing nitrogen fertiliser is energy-intensive. Recovery can avoid some production when it actually replaces new fertiliser. Include vacuum electricity, transport and treatment in the comparison. Biogas needs a digestion process; urea treatment does not produce it.

IEA · Ammonia Technology Roadmap, 2021

Local sanitation and a more resilient nutrient supply

When fertiliser deliveries are disrupted, nearby sources of nutrients become more important. Sweden’s RISE is studying how recovered nutrients can support food security. We believe small sanitation systems can play a part where collection, treatment and use on farms are planned together. Small scale alone does not make a system resilient.

Vacuum equipment needs electricity. Collection needs fuel, access and staff. Plan for prolonged disruption, including emergency toilet provision and safe storage.

  • Backup power or an alternative toilet
  • Storage capacity if collection is delayed
  • Fuel, spare parts and trained operators
  • Agreements for treatment, storage and agricultural use

Evidence: RISE and the Swedish Environmental Protection Agency

Examples from England

English projects show different routes to nutrient recovery. These examples distinguish research and centralised treatment from a complete vacuum-to-field system.

Bristol · NPK Recovery

A Forestry Commission-funded project for 2025–2028 is testing fertiliser made from human urine in tree nurseries. It will assess growth and other plant responses. This is research into nutrient reuse, not proof of higher crop yields or a documented household vacuum system.

Forestry Commission · funded projects, updated February 2026

Slough, Berkshire · phosphorus recovery

Ostara’s published case study describes recovery of phosphorus as struvite fertiliser at Thames Water’s Slough treatment works. This is a centralised wastewater example, not source-separated vacuum collection. It demonstrates another route for returning nutrients to use.

Ostara · supplier case study

Making the cycle work safely

How does toilet waste become fertiliser?

Collection must be followed by controlled treatment and product quality checks. For ammonia-based sanitisation, performance depends on time, temperature, pH and ammonia concentration. Added urea supplies nitrogen too; that is separate from recovered nutrients.

SLU · ammonia-based sanitation
What about pharmaceutical residues?

Pathogen inactivation does not establish removal of pharmaceuticals. A study found little or negligible effect of urea treatment on most pharmaceuticals investigated. Contaminants and treatment options must be assessed. Biological activity in soil does not guarantee that all residues disappear.

Research · Science of the Total Environment
Will yields be higher?

Recovered nutrients can support crops when their availability and application match crop requirements. Higher yields are not guaranteed. Product analysis, soil conditions and comparable crop measurements are needed to assess the outcome.

SLU · nutrient recovery
What does the loaf of bread comparison mean?

SLU illustrates the potential with one person’s daily urine: it contains nutrients that could support growing about 500 grams of wheat, enough for a loaf. This is a daily nutrient potential, not a claim about each flush or a guaranteed harvest.

SLU · educational example, 2025

Sources checked 13 November 2026. Permits, product requirements and local conditions must be established for each project.

Environmental benefits in a Swedish system

A study of Helsingborg’s H+ system found lower estimated climate impacts and water consumption than the conventional alternative when the benefits of recovered resources were included. It assessed the whole chain, including separated wastewater and food waste. Electricity, chemicals and the assessment method affected the conclusions. Environmental benefits therefore need to be assessed for each project.

Lima et al. · Journal of Cleaner Production, 2023

Assess the benefits for each project

  • How much flush water is saved compared with the actual alternative?
  • What do collection and treatment require in electricity, materials, chemicals and maintenance?
  • Which resources are recovered in practice, and which products or services do they replace?

Vacuum technology can be an important part of the solution. Assessing its environmental benefits means weighing water savings and resource recovery against the impacts of construction, operation and treatment.

Compare flush-water use

Applications and local conditions

Distinguish building systems, vacuum toilets connected to sealed tanks and area networks. An area network does not require every house to have a vacuum toilet. Results from one case should not be transferred to another. System selection needs to consider energy, servicing, capacity and the entire wastewater chain.

Operation, maintenance and refurbishment of vacuum sewerage systems

The Fraunhofer IGB / GIZ guideline describes the need for expertise from planning to operation and how air leaks and valve operation affect operating costs. ANCHOR's Oceanhamnen article describes continuous pressure monitoring and monthly leak tests. This is a documented example of operational tasks, not a universal maintenance plan for every installation. Before refurbishment, the owner should assemble drawings, operating issues and service records. Assess the work needed on valves, pipes, the station and monitoring, and how wastewater service will be maintained during the work. Refurbishing a sewer system is a different task from replacing toilets in a building.

Before refurbishment: questions for the owner

Bring this information to discussions with the designer, operator and system supplier. These questions support a feasibility study; they are not a design specification.

Flows and faults
What flows and loads does the system receive, and when do alarms, blockages or vacuum losses occur?
Condition and scope
What do service records and investigations show about valves, pipes, pumps and controls? Can maintenance resolve the issue, or do components need replacing?
Access and continuity
How can components be reached, and how will wastewater service be maintained during the works?
Follow-up
Which operating data should be compared before and after the work to assess performance and energy use?
Manufacturer perspective: Roediger on modernization, operating data and remote diagnostics

Sources for system selection and maintenance

  • Specialist expertise is needed from planning through operation; air leakage and valve performance affect operating costs.

    Fraunhofer IGB / GIZ

    Source and scope

    Guideline: Vacuum sewer systems – Fraunhofer IGB / GIZ

    December 2016.

    Type: Guidance · Reviewed: Full text · Checked 2026-10-12

  • A need for clear installation and adjustment instructions, user information and effective service arrangements.

    Havs- och vattenmyndigheten

    Source and scope

    Utvärdering av användaraspekter av vakuumtoaletter till sluten tank – Havs- och vattenmyndigheten

    Report summary. 80% of respondents satisfied; response rate unknown — not generalised.

    Type: Public authority · Reviewed: Summary · Checked 2026-10-12

  • Continuous pressure monitoring and monthly leak tests; larger leaks can increase energy use and disrupt operation.

    Interreg North Sea, ANCHOR

    Source and scope

    Leak detection in vacuum systems – insights from the Oceanhamnen demo – Interreg North Sea, ANCHOR

    Article dated 3 April 2026. Shows operational tasks, not the number of vacancies.

    Type: Project · Reviewed: Full text · Checked 2026-10-12

A vacuum toilet in a holiday home: what needs planning?

Start with the whole wastewater chain: toilet wastewater, the remaining household wastewater and how each will be managed. A low-flush toilet does not replace planning for the rest of the installation.

Vacuum toilet with a holding tank

The Swedish Agency for Marine and Water Management provides an installation guide for Swedish homes and holiday cottages. Discuss permits and site conditions with the municipality early. The guide’s historical cost examples are not current quotations; Swedish requirements do not determine permissions in other countries.

Sweden · Havs- och vattenmyndigheten, guide published 2017

How is greywater handled?

Wastewater from bathing, washing and kitchen use needs a separate solution when toilet wastewater is collected separately. Hudiksvall’s guidance illustrates this arrangement in Sweden. Its dimensions and siting advice are local guidance, not universal design rules.

Swedish municipal example · Hudiksvall

How often will the tank need emptying?

Our calculator covers flush water only. It cannot predict emptying intervals on its own: urine and faeces also enter the tank. Ask the designer to account for every inflow, seasonal occupancy, usable storage, alarm margin and tanker access.

Background on blackwater contents · HAMBURG WASSER

Vacuum sewer vs pressure sewer

Compare conveyance, operating responsibilities and site conditions before selecting a system. Neither option is best for every site.

Where does the driving force come from?

Pressure sewers use pumps to push wastewater through pipes. Vacuum sewers use negative pressure generated at a station and interface valves. Virginia Tech compares these principles in a US technical overview. Local design requirements need a separate assessment.

Virginia Tech · US technical comparison

Flat ground, rock and a high water table

Ground conditions can make deep gravity sewers difficult to construct. Compare excavation, pipe profile, capacity, energy and servicing across the options. Roediger describes shallower trenches as a potential advantage of vacuum sewers; this is supplier information, not a guaranteed saving for a new project.

Roediger · supplier’s system description

Connections require a capacity assessment

Anglian Water assesses connection points, capacity and pressure before extensions to its English vacuum networks. A nearby pipe alone does not establish that a property can connect. Ask the local utility which conditions apply to the particular network.

England · Anglian Water connection guidance

Turn documented examples into procurement questions

Include flows, power and backup supply, spare parts, maintenance responsibilities and lifetime costs in the feasibility study. Ask bidders to distinguish calculated figures from measured results and state assumptions, system boundaries and the proposed monitoring plan.

Jenfelder Au: separate blackwater collection

HAMBURG WASSER describes keeping toilet wastewater apart from greywater and rainwater for treatment and energy recovery. The owner’s question concerns the complete collection-and-treatment chain, not simply the choice of toilet.

Hamburg, Germany · HAMBURG WASSER

Oceanhamnen: air leaks and operating data

ANCHOR’s 3 April 2026 account describes NSVA’s pressure monitoring and monthly leak testing in Oceanhamnen. Ask how faults will be found, who receives alarms and how repairs are followed up in your project. These test intervals describe this demonstration, not a universal requirement.

Helsingborg, Sweden · Interreg ANCHOR, 3 April 2026

Common questions about vacuum sewerage

Are vacuum toilets and vacuum sewer networks the same?

No. An area network can receive wastewater from gravity drainage without every house having a vacuum toilet. This does not automatically reduce flushing water.

How much water does a vacuum toilet use?

Around 0.7–1.2 litres per flush is an indicative range for conventional vacuum toilets. Actual use depends on the product, settings and system. The calculator illustrates flush-water use; it does not assess system performance or sizing.

What needs to be planned for operation and servicing?

Assess the air-to-liquid ratio, transport distances, pipe gradients and lifts, and whether the system carries blackwater only or also greywater. Use the flush volume specified for reliable operation by the system supplier. A lower volume is not automatically better. Plan for installation, settings, user guidance and servicing.

A crucial distinction: vacuum toilets and vacuum sewer networks

A vacuum sewer network outside buildings can collect conventional wastewater from gravity drainage through collection chambers and interface valves. This does not require every building to have a vacuum toilet, and therefore does not automatically save flushing water.

The training therefore distinguishes between three cases: building systems, vacuum toilets connected to a sealed holding tank, and area-wide networks. Results from one are not combined with those from another.

Evidence and its scope

  • Investment needs are estimated at SEK 560 billion up to 2040, approximately SEK 31 billion per year.

    Svenskt Vatten

    Source and scope

    Investeringsbehov och framtida kostnader för kommunalt vatten och avlopp, R2023-02 – Svenskt Vatten

    The entire municipal water and wastewater sector, report estimate from 2023, PDF p. 8. Not an order volume for vacuum technology or Vakuumsäker.

    Type: Industry report · Reviewed: Full text · Checked 2026-10-12

  • Continuing skills shortages and substantial needs associated with maintenance and new construction in water and wastewater services.

    Myndigheten för yrkeshögskolan

    Source and scope

    Områdesanalys 2024 – Vatten och avlopp – Myndigheten för yrkeshögskolan

    Report year 2024, PDF p. 17. Water and wastewater generally, not specific demand for vacuum expertise.

    Type: Public authority · Reviewed: Full text · Checked 2026-10-12

  • A lack of expertise in alternative systems makes procurement, installation, operation and maintenance more difficult.

    Water Wise Societies / EHLSA

    Source and scope

    Slutrapport EHLSA – Ett vattenhållbar lokal systemomställning för global applikation – Water Wise Societies / EHLSA

    PDF pp. 16–18, 25, 38–39. Supports the proposed direction; no approval of Vakuumsäker’s courses.

    Type: Research · Reviewed: Full text · Checked 2026-10-12

  • Continuous pressure monitoring and monthly leak tests; larger leaks can increase energy use and disrupt operation.

    Interreg North Sea, ANCHOR

    Source and scope

    Leak detection in vacuum systems – insights from the Oceanhamnen demo – Interreg North Sea, ANCHOR

    Article dated 3 April 2026. Shows operational tasks, not the number of vacancies.

    Type: Project · Reviewed: Full text · Checked 2026-10-12

  • Four demonstration sites, four operating manuals and three video demonstrations for vacuum systems.

    Interreg North Sea, ANCHOR

    Source and scope

    ANCHOR – outputs – Interreg North Sea, ANCHOR

    Background information. Rights are checked before reuse. No partnership.

    Type: Project · Reviewed: Summary · Checked 2026-10-12

  • A developed vacuum toilet using 0.5–0.7 litres per flush.

    Run4Life (EU)

    Source and scope

    Run4Life – Vacuum toilet – Run4Life (EU)

    Applies to a developed ultra-low-water-use model, not all products.

    Type: Project · Reviewed: Full text · Checked 2026-10-12

  • Approximately 700,000 small wastewater systems serving flush toilets in Sweden.

    Havs- och vattenmyndigheten

    Source and scope

    Avlopp – faktasida – Havs- och vattenmyndigheten

    Last updated in 2020 — older authority information, not a new survey.

    Type: Public authority · Reviewed: Full text · Checked 2026-10-12

  • The authorities seek analyses of socioeconomic, legal and social conditions for source separation and improved water efficiency.

    Naturvårdsverket och HaV

    Source and scope

    Forskningssatsning om avloppsvatten – Naturvårdsverket och HaV

    The call closed on 14 September 2026. Must not be shown as open funding.

    Type: Public authority · Reviewed: Full text · Checked 2026-10-12

Calculate flushing water use – a scenario with explicit assumptions

How much water does your toilet use per year?

Worked example: four people

At 6 flushes per person per day, 365 days and 6 litres per flush, annual use is 52,560 litres. At 1 litre per flush it is 8,760 litres. The difference is 43,800 litres, or 43.8 m³ a year. These are illustrative assumptions, not a promise of savings. Use values for your toilet and usage.

Choose a worked example

These are illustrative examples. Adjust the values to suit your project.

Estimated annual difference

1,095.00 m³

decrease of flushing water per year (83.3 %)

Option A
1,314.00 m³
Option B
219.00 m³

0 £

no difference in variable costs

1.0 litre per flush is an example. Use the value for the selected product and system settings. A lower flush volume is not automatically better.

Gross flushing water volume – not the entire property’s water consumption. Electricity, servicing, spare parts and other operating costs must be deducted to obtain a net calculation. Fixed water and sewerage charges do not normally disappear. The comparison product makes a substantial difference.

Annual flush-water use. Users × flushes per person per day × days per year × litres per flush ÷ 1,000.

Early system selection

Select the conditions that apply to your project to get questions for your next meeting.

Start by defining the flows to collect, where they will be treated and who will own and operate the system. Compare vacuum, gravity and pressure systems on the same basis.

Before a feasibility study and investment decision

Bring the client, designers and operations team together around four questions. The answers help identify what your project needs to investigate.

  1. 1.Objectives and comparison

    What need must be met, and which options are relevant? Compare the options using the same assumptions about use, capacity and appraisal period.

  2. 2.Environmental outcomes to measure

    What differences are expected in water use, energy demand and resource recovery? Consider the whole wastewater chain, define the comparison and decide how to measure performance after commissioning.

  3. 3.Costs over the lifecycle

    What will construction, operation, maintenance and decommissioning cost? Explore how changes in use, energy prices and service life affect the appraisal.

  4. 4.Responsibilities and delivery

    Who will be responsible for design, installation, operation and monitoring? What skills, service response and spare parts will be needed? Draw on operating experience from comparable installations.

A feasibility study provides an opportunity to examine benefits, costs and uncertainties before an investment decision. Record assumptions and responsibilities so that outcomes can be monitored.

HM Treasury · The Green Book (2026), appraisal guidance
Explore the training programmes

How we distinguish between sources

Research findings, supplier information and our own example calculations are presented separately, each with a date and link. Where only an abstract has been reviewed, this is stated. Any future claims that our training specifically has led to more assignments will be based on participant follow-up.